If you have been thinking about investing in solar panels for your home, then you are probably aware of the proposed changes to the feed in tariff (FITs) for new Solar Photovoltaic (PV) installations.
As part of the review consultation, the proposal is that if you install Solar PV and your solar panel installation is not registered with your utility provider on or before 12th December 2011 you could be affected by the proposed changes, which are broadly as set out here:
It is true that these figures are still under discussion and review, but if you are considering installing solar panels for your home after 12th December 2011 then it is recommended that you base your decision on the lower rates of feed in tariff.
In terms of deciding whether to install solar panels (setting the environmental considerations aside) the potential financial returns from investing are possibly the biggest influencing factor – do solar panels still represent a good investment?
As is clearly demonstrated by this example, double digit tax free returns are still realistically achievable, (even lower installation prices have been quoted to the writer) due in part to the significant reductions in cost for the hardware (solar panels) and high levels of competition in the solar pv market.
In my opinion, installing solar panels for your home still represents one of the best investments around, to find out if your home is suitable for installing solar pv and what financial benefits you could receive, simply … More...
Steady funds from the government and the pouring support of investors have lead to innovations in solar energy’s infinite potential. One of the companies currently working in this arena is MES Power who also specialise in high voltage power engineering and wind turbine hookups. There are three solar energy active conversions: solar photovoltaic, concentrated solar power, and solar heating and cooling.
Photovoltaic panels use silicon solar panels to convert the sun’s radiation to electrical energy. PV cells can be installed according to electricity needs and can power small devices like calculators and watches to a whole residential power requirement. There are also two kinds of photovoltaic panels: crystalline silicon (c-Si) modules and thin film modules.
C-Si modules. The majority of PV modules are based in crystalline silicon due to abundant resources. There are two main forms of c-Si: single-c-Si module and mc-Si or multi-crystalline silicon module. Commercial sc-Si converts electricity better than mc-Si while the latter is less expensive than single crystalline silicon modules.
Thin film modules Thin film PV modules are made by depositing extremely thin layers of photosensitive materials in glass, plastic, or stainless steel backing. The first thin film produce is a-Si or amorphous silicon. It offers several advantages including low consumption of raw materials, high production and automation efficiency, better performance in high ambient temperature, simple assembly and manufacturing integration, and more resistant to overheating. On the other hand, thin film modules have lower efficiency than crystalline silicon modules and the industry is yet … More...
If you decide to invest money in buying and installing a solar energy system at home, and your investment will more than pay for itself given enough time. You’ll save so much money on your utility bills that you will probably not need to wait more than five years to make your investment back.
Most people who decide to take the plunge going solar, mostly only think of the most visible part of the system – those huge PV arrays on the roof that announce to everyone that you’ve gone green. Well, there’s another part to any solar energy system that you need to think about too as Martin from ACE, a long establishes firm of Aberdeen electricians explains. Solar systems always need solar panel inverters to take the direct current put out by PV panels and convert them to usable utility-style alternating current.
No one gives much thought to solar panel inverters – they just seem like they are a cog in the wheel – that they don’t do anything special.
Of course, that’s not true. You need efficient solar panel inverters to really get steady and usable power out of your solar arrays. Certainly, you could just order solar installers to come in and do the whole thing, you wouldn’t have to ever think about the components that went into the system. If you are more hands-on kind though, you’ll find that you you can often get a better system to go shopping around yourself. When you head … More...
There is a ton of research to be done ahead of purchasing solar panels. Part of that research needs to be about which solar panels to buy. You don’t want to invest your money in equipment which ends up failing you down the road, so read the tips below to find out how to make the best decision. You will end up making money thanks to your great decision! When it comes to the price of a solar panel, it is the wattage, physical size, quality, brand, certifications and longevity which often affect the overall cost. That said, you cannot choose which panel to buy based just on the price.
You have to figure out if its size fits your needs, both in wattage and physical dimensions. You also need to know if the certifications it carries qualify you for government rebates or not. On top of that, you want a high quality system in place, otherwise you’re wasting your money. Consider all of these factors as well as your budget before you buy any panels. Another thing to consider is which tier of manufacturer quality the panels come from. The first tier contains a small number of manufacturers who lead the field in innovation, quality control and materials used. Tier two is good, but not great. Tier three makes up the bulk of the companies out there, and they only focus on assembling panels, not creating new technologies. They buy cells from other companies and you have no idea … More...